Duralux Camouflage Paint, Quart

$35.88

Brand: Duralux Marine Paints

Product Code: DUR-CamoQT

Stock In Stock

Available Options

Size

Quart

Color

Pirouge Green

Dead Grass Green

Duckboat Drab

Qty

Add to wishlist
Add to compare

Categories Cart Account Search Recent View Go to Top

Product Description

Camouflage paint for protecting and camouflaging hunting boats, oars, blinds, and decoys. May be used on metal, wood, and fiberglass. Using the colors in combination will give an excellent camouflaged surface, and durability for a long-lasting effect.

Duralux Camouflage Colors:

M745 Dead Grass Green

M746 Pirouge Green

M691 Duckboat Drab -

Size: 1 Quart

Camouflage Painting Techniques

Once the base coat of Duralux camouflage paint dries you can begin to paint a camouflage pattern. Use large leaves, sticks, and other shrubberies that you can hold against the surface. Use can use camouflage spray paint to paint around the edges of the objects. Make sure the paint extends three or four inches or more away from the edge of the object. Use several different plants or objects to get the pattern you are looking for. You can make a repeating pattern or paint in a random order over the entire surface to obtain the desired camouflage paint effect.

Show More Show Less

DIRECTIONS FOR USE:

SURFACE PREPARATION: The surface must be dry and free of grease, wax, dirt, or other foreign matter. Scrape off all loose paint and dull any gloss area with a light sanding or power brushing. Remove all dust with a cloth dampened with paint thinner and allow to dry.

APPLICATION:

Unpainted Surfaces:
Fiberglass: Wipe down with Acetone prior to sanding and after sanding. Top with two full coats of Duralux Camouflage Paint.
Wood - Prime and apply two coats of Duralux Camouflage Paint.

Steel: On clean, rust-free steel, apply two coats of Duralux Sub Trop Red Metal Primer M740 apply two coats of Camouflage Paint.

Aluminum: Pretreat with suitable wash primer, and apply two coats of primer. Top with two full coats of Duralux Camo Paint.

Painted Surfaces:
Fiberglass: Wipe down with Acetone prior to sanding and after sanding. Top with two full coats of Camouflage Paint.
Wood - Sand thoroughly, spot prime bare areas. Then apply two full coats of Duralux Camouflage Paint.

Steel: Clean all bare areas to bright steel. Touch up with two coats of Duralux Sub Trop Red Metal Primer M740. Top with two full coats of Duralux Camo Paint.

Aluminum: Touch up all bare areas with primer. Top with two full coats of Duralux Camouflage Paint.

THINNING: Duralux is made for use as it comes from the can. If thinning is desired, Use no more than a one-half pint of Mineral Spirits or Xylene per gallon. For spraying, use one-half pint to one pint per gallon.

COVERAGE: On properly prepared surfaces, expect to cover from 400-500 square feet per. gallon.

DRYING TIME: Four hours, hut slightly longer on damp or cold days. Allow 12-16 hours for thorough hardening before repainting.

CLEAN UP: Clean equipment with paint thinner M650.

PRODUCT DATA:

Sheen: Flat
Package Viscosity @ 77* F: 75-82 Kreb Units
Weight per Gallon (U.S.): 10.05
% Solids by Weight: 65%
% Solids by Volume: 46%
Recommended Dry Film Thickness: 1.25-1.5 Mils
Method of Application: Brush, Roller or Spray
Application Viscosity @ 77* F: 77 Kreb Units
Theoretical Spreading Rate @ 1Mil DFT: 400-500 square feet per Gallon
VOC: Maximum 3.8 # per Gallon
Dry Time: To touch - 4 hours, Recoat-12-16 hours Minimum

Thinner/Cleaner: M650 Paint Thinner
Reduction Ratio: None required, but if spraying use no more than 10%