Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of pai..

Designed for hot climates, Islands 44 Reducer should be the only reducer used in Islands 44 Plus. Never thin paint more than ..

Designed for use in Cukote, Tropikote, Biocop TF, Sharkskin and most Sea Hawk bottom paints when temperatures are above 85°F...

When temperature is below 85°, Sea Hawk 2033 Cool Weather Reducer is designed to flash quicker. This bottom paint r..

VOC-Exempt Reducer 2053 is a premium quality solvent comparable to those used in Sea Hawk reduced VOC antifouling paints. It ..

TUFF STUFF Reducer 2084 is a premium quality solvent formulated specifically for reducing/thinning TUFF STUFF High Build Epox..

Brush-Ease 433 is a slow drying solvent to ease brushing and rolling and to improve flow. Interlux Brush-Ease 433 should o..

Interlux Brush Reducer 2333N is a slow evaporating solvent for use in specific two-part polyurethane and epoxy products. For ..

Interlux Fiberglass Solvent Wash 202 removes mold release agents, wax, oil and grease from hulls of bare fiberglass boats. It..

Is a low VOC contamination/mold release agent remover used for preparing fiberglass bottoms of new boats or unpainted hulls b..

Interlux 216 Special Thinner is a fast evaporating solvent which, when added to specified paint coatings, improves drying in ..

Blue Water Marine 974 Thinner  Improves the application and the flow of coatings for brushing and rolling. A slow drying..

Acetone used for paint application, thinning and clean up. Please check the product you are using for the recommended clea..

Styrene Monomer, used as a thinner in gelcoats and resins to aid in application. Will not cause yellowing of gelcoat and is t..

Every new fiberglass hull produced is released from the mold by a mold release wax. In order to obtain proper adhesion of pai..