Column Left Debug: 0
Oceanmax Propprep by PROPSPEED, 500ML
Product Description
Propspeed Propprep 500ML is a special metal conditioner designed to provide a chemically conditioned surface prior to painting/applying Propspeed.Propprep is used as a pretreatment for propellers, shafts, struts and rudders prior to application of the Propspeed foul release system. Apply Propprep solution liberally by rag or wipes, working over small areas at a time. Do not allow the Propprep solution to dry out. Remove by wiping off thoroughly with a clean rag. To be used before applying the Propspeed Etching Primer.
Sorry, this item is no longer available.
The Propspeed system is best used on propellers, shafts, struts, rudders, trim tabs, keel coolers, bow and stern thrusters, and other underwater metal or running gear.
Note: Propclean and Propprep are a critical part of the metal surface preparation process for applying Propspeed. Both can be purchased separately.
Recommended for professional use only.
Propprep is acidic. Operators should wear gloves, goggles and protective clothing. If splashed onto the skin, wash off with copious amounts of soap and water. If splashed into eyes, wash and flush eye with water for minimum of 15 minutes. In case of ingestion, give patient copious quantities of water or milk. Do not induce vomiting. In all cases seek medical attention promptly.
See MSDS for further safety information.
Transport - UN No. : 1805
Class : 8
Hazchem : 2R
Packing Group III
Storage
Store locked up, in a cool dry place away from foodstuffs. Ensure that Propprep is stored in a
corrosive resistant container with a resistant inner liner.
Propspeed Application Guidelines
Propprep Technical Data:
Propspeed Clear Coat Techincal Data Sheet
Propprep Safety Data
