My cart

0 item(s) - $0.00

  • Your shopping cart is empty!

Pettit Odyssey® 60 Paint, Gallon
Pettit Odyssey® 60 Paint, Gallon
Pettit Odyssey® 60 Paint, Gallon

Pettit Odyssey® 60 Paint, Gallon

$389.67
Brand:
Product Code: PETTIT ODYSSEY 60
Stock In Stock

Available Options

Product Description

Pettit Odyssey® 60 delivers exceptional, multi-season performance against fouling by offering the highest copper content in an ablative available. With significantly more copper than many competitors, Odyssey® 60 offers stronger protection at a better value. Fast dry technology provides quick turnaround and increased production for all applicators.

Its unique controlled erosion technology minimizes coating build-up while keeping underwater surfaces smooth. Its ablative surface wears away with use providing a continuous supply of fresh biocides while eliminating the need for sanding. Odyssey® 60 can be hauled and re-launched without repainting.

MULTI-SEASON ABLATIVE ANTIFOULING BOTTOM PAINT 

  • Fast dry, VOC compliant standard for boatyards
  • High-copper ablative protection in all waters
  • Smooth polishing finish prevents buildup and sanding
  • Compatible over most bottom paints
  • Covered by HD (Hull Defense) 18 Month Limited Warranty

Available Colors: Black 1865

Pettit Odyssey® 60 Colors

*This Item Ships From South Florida  – Click to See Estimated Transit Times 

Size Chart

APPLICATION INFORMATION

APPLICATION SYSTEMS: Odyssey 60 is easily applied by brush, roller or spray. When rolling use only a high-quality short nap  (maximum 3/16” nap) roller cover. Apply using thin coats; over-application of this product will virtually assure inadequate coating performance. Mix paint thoroughly to ensure toxicants are evenly dispersed throughout the can. All surfaces must be clean, dry and  properly prepared prior to painting. Do not apply Odyssey 60 on aluminum hulls or outdrives.

 

PREVIOUSLY PAINTED SURFACES: If the previous coating is  in good condition, thoroughly sand with 80 grit paper then  solvent clean with 120 Brushing Thinner to remove residue.  Apply two finish coats of Odyssey 60. If the previous coating is  soft or in poor condition, remove to the bare surface by sanding  or using EZ Speed Strip™ 125. Proceed with appropriate bare  system as described below.
BARE FIBERGLASS: All bare fiberglass, regardless of age,  should be thoroughly cleaned with 92 Bio-Blue® Hull Surface  Prep or de-waxed several times with Pettit D-95 Dewaxer. SANDING METHOD: Sand the hull thoroughly with 80-grit  sandpaper to a dull, frosty finish and rewash the sanded surface  with 120 Brushing Thinner to remove sanding residue. Then  apply two or three thin coats of this product, following  application instructions. Careful observation of application  instructions will help ensure long-term adhesion of this and  subsequent years’ antifouling paint.
TO ELIMINATE THE SANDING OPERATION: Thoroughly  clean, de-wax and etch the surface with 92 Bio-Blue Hull Surface  Prep using a course Scotch-Brite® pad. Thoroughly rinse all  residue from surface and let dry. Then apply one coat of Pettit Protect® High Build Epoxy Primer. Consult the primer label for  complete application and antifouling top coating instructions.  Apply two or three thin coats of this product.
 
KEELS – STEEL OR CAST IRON: Abrade surface to bright  metal; clean off residue. Apply one coat of 6980 Rustlok® Steel  Primer, allowing to dry only 1-2 hours prior to over coating with  one coat of 4700/4701 High Build Epoxy Primer. Then, if fairing  is required, apply 7050 EZ Fair Epoxy Fairing Compound followed  by one additional coat of 4700/4701 High Build Epoxy Primer,  finish with two or three coats of this product.
 
BARRIER COAT: Fiberglass bottoms potentially can form  osmotic blisters within the gelcoat and into the laminate. To  render the bottom as water impermeable as possible, prepare  the fiberglass surface as mentioned above (sanding method)  then apply two to three coats of Pettit-Protect 4700/4701 Gray  High Build Epoxy Primer or three coats of Pettit Protect  4100/4101 White High Build Epoxy Primer per label directions.  Apply two or three thin coats of this product. See Technical  Bulletin TB-1000 for detailed instructions.
BLISTERED FIBERGLASS: See Pettit Technical Bulletin TB-1000 Gelcoat Blister Repair and Prevention Specification for  detailed instructions.
BARE WOOD: Bare wooden hulls should be sanded thoroughly  with 80-grit sandpaper and wiped clean of sanding residue with  120 Brushing Thinner. A coat of 6627 Tie-Coat Primer thinned  25% with 97 Epoxy Thinner should be applied directly to the  bare wood. Allow drying 4 hours and then applying two unthinned coats of Odyssey 60 per instructions. Existing, hard  antifouling paint should be thoroughly sanded. If priming is  necessary on bare wood spots, apply a touch-up coat of 6627  Tie-Coat Primer thinned 25% with 97 Epoxy Thinner to these  areas. Then apply the subsequent coats of this product.
STEEL HULLS: To remove loose rust and scale from the metal  surface, scrape, sandblast or wire brush. Solvent clean the  surface to remove grease and dirt then apply one or two coats of  Pettit 6980 Rustlok Primer* followed by two coats of Pettit  4700/4701 High Build Epoxy Primer. Follow with this product.
 
MAINTENANCE: No antifouling paint can be effective under all conditions of exposure. Man-made pollution and natural occurrences  can adversely affect antifouling paint performance. Extreme hot and cold-water temperatures; silt, dirt, oil, brackish water and even  electrolysis can ruin an antifouling paint. Therefore, we strongly suggest that the bottom of the boat be checked regularly to make  sure it is clean and that no growth is occurring. Lightly clean the bottom with a sponge or cloth to remove anything from the  antifouling paint surface. Cleaning is particularly important with boats that are idle for extended period of time.

SDS

 

 

 

PHYSICAL DATA
FINISH: Flat
Available Colors:  Blue 1265, Green 1365, Red 1665, and Black 1865
COMPONENTS: 1
CURING MECHANISM: Solvent Release
SOLIDS (theoretical):
By weight...84 +/- 2%
By volume...54 +/- 2%
COVERAGE: 440 sq. ft/gal.
VOC: 370 g/l max. (as supplied)
FLASH POINT...73°F (SETA)

APPLICATION DATA
METHOD: Brush, Roller, Airless or Conventional Spray. When applying by roller use a short nap (3/16 inch maximum) roller cover.
NUMBER OF COATS: 2 minimum
DRY FILM THICKNESS PER COAT: 2 mils (3.6 wet mils)
APPLICATION TEMP: 50° F. Min. / 90°F. Max.
DRY TIME* (HOURS):
To Recoat To Launch
90°F 3 8
70°F 6 16
50°F 12 48

THINNER:
120 Brushing thinner

So Extra Slider: Has no item to show!
Pettit Odyssey® 60 Paint, Gallon

Pettit Odyssey® 60 Paint, Gallon

$389.67